BASE COAT & ADHESIVE 121XL |
DESCRIPTION:
 Base Coat for Parex EIFS
Adhesive to laminate EPS to listed substrate
Applied without the addition of cement
Mixed on site with water
FEATURES:
 Excellent workability
Superior mesh embedding capability
Extended open time for working under hot, dry conditions. (Precaution: Because 121XL is optimized for these conditions, adhesive applications require warmer temperatures than base coat applications)
Smooth, easy handling
USES:
Adhesive for temperatures 50°F (10°C) and higher.
EPS adhesive for the following substrates:
 Exterior-grade gypsum sheathing
Glass mat gypsum sheathing
Masonry, concrete, cement board
EPS
Base coat for Parex EIFS & Direct Applied Finish System
Leveler and filler for masonry, concrete, stucco surfaces. For this application only, 121XL can be built up to 1/4 in. (6mm) thick in a single pass.
COMPOSITION:
Binder base: Copolymer compatible with portland cement
Water-based: VOC-compliant
Color: Light grey
|
