Optimum WaterMaster CI
Optimum WaterMaster CI is our premium CI system. It has all the benefits of the base level CI system and drainage system. However, Optimum WaterMaster CI makes use of a premium base coat & adhesive as well as the premium Optimum finish. The use of these two components allows Parex to back this system with an improved warranty and ensure your building maintains its aesthetic appeal for a longer duration.
|
Aesthetic Features
SWM A1.01 - Aesthetic Band and Reveal |
dwg | ||
|
Complete Details
Complete Parex Standard/Optimum WaterMaster System Details |
dwg | ||
|
Detail
SWM G1.05 - Inside and Outside Corners |
dwg | ||
|
Expansion Joints
SWM - E1.07 Horizontal Expansion Joint |
dwg | ||
|
Expansion Joints
SWM E1.06B - Vertical Expansion Joint(ISO) |
dwg | ||
|
Expansion Joints
SWM E1.01 - Inside Corner Termination |
dwg | ||
|
Expansion Joints
SWM E1.02 - Through-System Flashing with Weeps |
dwg | ||
|
Expansion Joints
SWM E1.03 - Expansion Joint at Dissimilar Substrates |
dwg | ||
|
Expansion Joints
SWM E1.04A - Floor Line Deflection Slip Joint (2D) |
dwg | ||
|
Expansion Joints
SWM E1.04B - Floor Line Expansion (ISO) |
dwg | ||
|
Expansion Joints
SWM E1.05A - Expansion Joint with Flashing at Floor (2D) |
dwg | ||
|
Expansion Joints
SWM E1.05B - Expansion Joint with Flashing at Floor (ISO) |
dwg | ||
|
Expansion Joints
SWM E1.06A - Vertical Expansion Joint (2D) |
dwg | ||
|
General Construction
SWM G1.01 - Parex Standard/Optimum WaterMaster System Components |
dwg | word | |
|
General Construction
SWM G1.02 - Framed Wall Application |
dwg | word | |
|
General Construction
SWM G1.03A - Window Flashing Procedure 1 of 2 |
dwg | word | |
|
General Construction
SWM G1.03B - Window Flashing Procedure 2 of 2 |
dwg | word | |
|
General Construction
SWM G1.04 - Preliminary Mesh Application |
dwg | ||
|
Penetrations
SWM P1.01 - Fixture Attachment (by others) |
dwg | ||
|
Penetrations
SWM P1.02 - Hose Bib (by others) |
dwg | ||
|
Penetrations
SWM P1.03 - Downspout Attachment (by others) |
dwg | ||
|
Penetrations
SWM P1.04 - Termination at Appliance Sleeve (by others) |
dwg | ||
|
Penetrations
SWM P1.05 - Termination at Small Electrical Feature (by others) |
dwg | ||
|
Penetrations
SWM P1.06 - Deck Attachment (by others) |
dwg | ||
|
Penetrations
SWM P1.07 - Handrail Attachment (by others) |
dwg | ||
|
Roof Line
SWM R1.01A - Termination at Box Cornice (2D) |
dwg | ||
|
Roof Line
SWM R1.01B - Termination at Box Cornice (ISO) |
dwg | ||
|
Roof Line
SWM R1.02A - Termination at Soffit With Insulation |
dwg | ||
|
Roof Line
SWM R1.02B - Termination at Soffit Without Insulation |
dwg | ||
|
Roof Line
SWM R1.03 - Parapet Wall Termination at Cap Flashing |
dwg | ||
|
Roof Line
SWM R1.04 - Gravel Stop |
dwg | ||
|
Roof Line
SWM R1.05 - Intersection of Roof Cornice at System Wall |
dwg | ||
|
Roof Line
SWM R1.06 - Termination at Roof |
dwg | ||
|
Terminations
SWM T1.01A - Termination Above Foundation (Vented Track) |
dwg | word | |
|
Terminations
SWM T1.01B - Termination Above Foundation (Backwrapped) |
dwg | word | |
|
Terminations
SWM T1.02 - Termination At Grade |
dwg | ||
|
Terminations
SWM T1.03A - Cladding Transition (2D) |
dwg | ||
|
Terminations
SWM T1.03B - Cladding Transition (ISO) |
dwg | ||
|
Terminations
SWM T1.04 - System Termination at ADA Sidewalk |
dwg | ||
|
Terminations
SWM T1.05 - Termination at Balcony Slab |
dwg | ||
|
Windows
SWM W1.01 - Head Assembly (Window, Door, Louver Vents, Etc) |
dwg | word | |
|
Windows
SWM W1.02 - Termination at Window Head |
dwg | word | |
|
Windows
SWM W1.03A - Termination at Metal Flashed Window Sill (2D) |
dwg | ||
|
Windows
SWM W1.03B - Termination at Metal Flashed Window Sill (ISO) |
dwg | ||
|
Windows
SWM W1.04 - Termination at Window Jamb |
dwg | ||
|
Windows
SWM W1.05 - Termination at Finned Window Head |
dwg | ||
|
Windows
SWM W1.06 - Termination at Finned Window Sill |
dwg | ||
|
Windows
SWM W1.07 - Termination at Finned Window Jamb |
dwg |
download documentation
- Brochure
- System Snapshot
- Specification
- Application Guide
- Maintenance Guide
-
Safety Data Sheet
ACCESSORIES - PAREX USA ACCEL DRY SDS ACCESSORIES - PAREX USA ACCEL-PAK SDS ACCESSORIES - PAREX USA PLUS ADVANTAGE AND ADDITIVES SDS ACCESSORIES - PAREX USA SILICONE ADDITIVE SDS BASE COATS & ADHESIVES - PAREX 121 DRY HI BASE COAT AND ADHESIVE SDS BASE COATS & ADHESIVES - PAREX 121 DRY OPTIMUM BASE COAT AND ADHESIVE SDS BASE COATS & ADHESIVES - PAREX 121 DUSTLESS BASE COAT AND ADHESIVE SDS BASE COATS & ADHESIVES - PAREX 121 WET OPTIMUM BASE COAT AND ADHESIVE SDS FINISHES - PAREX OPTIMUM FINISH SDS MESHES - PAREX USA MESH SDS PRIMERS - PAREX USA PRIMER SDS WRB-AIR BARRIER - PAREX USA 369 DRAINEDGE SDS WRB-AIR BARRIER - PAREX USA WEATHER DRY SDS WRB-AIR BARRIER - PAREX USA WEATHERSEAL SPRAY AND ROLL ON SDS WRB-AIR BARRIER - PAREX USA WEATHERSEAL TROWEL ON SDS WRB-AIR BARRIER - WEATHER TECH WEATHER SEAL VP AB LT SDS WRB-AIR BARRIER - WEATHERFLASH SDS WRB-AIR BARRIER - WEATHERTECH ACCESSORIES SDS
-
Technical Data Sheet
ACCESSORIES - PAREX USA ACCEL - DRY ACCESSORIES - PAREX USA ACCEL - PAK ACCESSORIES - PAREX USA ADACRYL ADMIX AND BONDER ACCESSORIES - PAREX USA PLUS ADVANTAGE AND SILICONE ADDITIVE BASE COATS & ADHESIVES - PAREX 121 DRY HI BASE COAT & ADHESIVE BASE COATS & ADHESIVES - PAREX 121 DUSTLESS BASE COAT AND ADHESIVE BASE COATS & ADHESIVES - PAREX 121 OPTIMUM DRY BASE COAT AND ADHESIVE BASE COATS & ADHESIVES - PAREX 121 OPTIMUM WET BASE COAT AND ADHESIVE FINISHES - PAREX DPR OPTIMUM FINISH MESHES - PAREX USA REINFORCING MESH PRIMERS - PAREX USA PRIMER WRB-AIR BARRIER - PAREX USA 369 DRAINEDGE WRB-AIR BARRIER - PAREX USA WEATHERDRY BASECOAT WRB-AIR BARRIER - PAREX USA WEATHERSEAL SPRAY AND ROLL ON WRB-AIR BARRIER - PAREX USA WEATHERSEAL TROWEL ON WRB-AIR BARRIER - WEATHER TECH WEATHER SEAL VP AB LT WRB-AIR BARRIER - WEATHERFLASH WRB-AIR BARRIER - WEATHERTECH ACCESSORIES WRB-AIR BARRIER - WEATHERTECH WEATHERBLOCK VB AB
Disclaimer
Parex CI systems products must be assembled as a system. Only Parex products or Parex USA approved products can be used to build the specified system. Failure to do so will void the warranty. Warranties are available upon request and will be issued to Parex USA currently listed applicators (CLA).
Parex USA applicators (CLA) status must be obtained prior to the start of the job.
Parex CI systems specifications and recommendations must be followed. Information can be found on the Parex website. Parex CI systems products should only be installed by Parex USA currently listed applicators (CLA).
Speciality CI Systems Assemblies: CI systems are available in a variety of configurations that can be engineered to meet specific design requirements. Those provided above are the most commonly specified. Please contact our Architectural Sales or Technical Support Teams for more design options that can help you create an energy efficient, code compliant, CI systems assembly with unlimited aesthetic flexibility.
Parex CI systems products must be assembled as a system. Only Parex products or Parex USA approved products can be used to build the specified system. Failure to do so will void the warranty. Warranties are available upon request and will be issued to Parex USA currently listed applicators (CLA).
Parex USA applicators (CLA) status must be obtained prior to the start of the job.
Parex CI systems specifications and recommendations must be followed. Information can be found on the Parex website. Parex CI systems products should only be installed by Parex USA currently listed applicators (CLA).
Speciality CI Systems Assemblies: CI systems are available in a variety of configurations that can be engineered to meet specific design requirements. Those provided above are the most commonly specified. Please contact our Architectural Sales or Technical Support Teams for more design options that can help you create an energy efficient, code compliant, CI systems assembly with unlimited aesthetic flexibility.