Standard CI
Standard CI is a classic CI system. This system offers the base level of benefits available in CI; energy efficiency, light weight, versatile design, and economical installation. Typically utilizes adhesive attachment of EPS foam. The system can be upgraded to use heavier weights of mesh to allow for superior impact resistance. Range of finish and color options provided for nearly unlimited design creativity.
Aesthetic Features
SS A1.01 - Aesthetic Band and Reveal |
dwg | ||
Complete Details
Complete Parex Standard/Optimum System Details All Details |
dwg | ||
Expansion Joints
SS E1.01 - Inside Corner Termination |
dwg | word | |
Expansion Joints
SS E1.02 - Through-System Flashing with Weeps |
dwg | word | |
Expansion Joints
SS E1.03 - Expansion Joint at Dissimilar Substrates |
dwg | word | |
Expansion Joints
SS E1.04A - Floor Line Deflection Slip Joint (2D) |
dwg | word | |
Expansion Joints
SS E1.04B - Floor Line Expansion (ISO) |
dwg | word | |
Expansion Joints
SS E1.05A - Expansion Joint with Flashing at Floor (2D) |
dwg | ||
Expansion Joints
SS E1.05B - Expansion Joint with Flashing at Floor (ISO) |
dwg | ||
Expansion Joints
SS E1.06A - Vertical Expansion Joint (2D) |
dwg | ||
Expansion Joints
SS E1.06B - Vertical Expansion Joint(ISO) |
dwg | ||
Expansion Joints
SS E1.07 - Horizontal Expansion Joint |
dwg | ||
General Construction
SS G1.01 - Parex Standard/Optimum System Components |
dwg | word | |
General Construction
SS G1.02 - Framed Wall Application |
dwg | word | |
General Construction
SS G1.03 - Preliminary Mesh Application |
dwg | word | |
General Construction
SS G1.04 - Inside and Outside Corners |
dwg | word | |
Penetrations
SS P1.01 - Fixture Attachment (by others) |
dwg | ||
Penetrations
SS P1.02 - Hose Bib (by others) |
dwg | ||
Penetrations
SS P1.03 - Downspout Attachment (by others) |
dwg | ||
Penetrations
SS P1.04 - Termination at Appliance Sleeve (by others) |
dwg | ||
Penetrations
SS P1.05 - Termination at Small Electrical Feature (by others) |
dwg | ||
Penetrations
SS P1.06 - Deck Attachment (by others) |
dwg | ||
Penetrations
SS P1.07 - Handrail Attachment (by others) |
dwg | ||
Roof Line
SS R1.01A - Termination at Box Cornice (2D) |
dwg | ||
Roof Line
SS R1.01B - Termination at Box Cornice (ISO) |
dwg | ||
Roof Line
SS R1.02A - Section at Fascia - Soffit With Insulation |
dwg | ||
Roof Line
SS R1.02B - Section at Fascia - Soffit Without Insulation |
dwg | ||
Roof Line
SS R1.03 - Parapet Wall Termination at Cap Flashing |
dwg | ||
Roof Line
SS R1.04 - Termination at Gravel Stop |
dwg | ||
Roof Line
SS R1.05 - Intersection of Roof Cornice at System |
dwg | ||
Terminations
SS T1.01 - Termination Above Foundation (Vented Track) |
dwg | word | |
Terminations
SS T1.02 - Termination At Grade |
dwg | word | |
Terminations
SS T1.03A - Cladding Transition (2D) |
dwg | word | |
Terminations
SS T1.03B - Cladding Transition (ISO) |
dwg | ||
Terminations
SS T1.04 - System Termination at ADA Sidewalk |
dwg | ||
Terminations
SS T1.05 - Termination at Balcony Slab |
dwg | ||
Windows
SS W1.01 - Termination at Window Head |
dwg | word | |
Windows
SS W1.02 - Termination at Flashed Window Sill |
dwg | word | |
Windows
SS W1.03A - Termination at Window Sill |
dwg | word | |
Windows
SS W1.03B - Termination at Window Sill |
dwg | ||
Windows
SS W1.04A - Termination at Metal Flashed Window Sill (2D) |
dwg | ||
Windows
SS W1.04B - Termination at Metal Flashed Window Sill (ISO) |
dwg | ||
Windows
SS W1.05A - Termination at Window Jamb |
dwg | ||
Windows
SS W1.05B - Termination at Window Jamb |
dwg | ||
Windows
SS W1.06 - Termination at Recessed Window Head |
dwg | ||
Windows
SS W1.07 - Termination at Recessed Window Jamb |
dwg |
download documentation
- Brochure
- System Snapshot
- Specification
- Maintenance Guide
-
Safety Data Sheet
ACCESSORIES - PAREX USA ACCEL DRY SDS ACCESSORIES - PAREX USA ACCEL-PAK SDS ACCESSORIES - PAREX USA PLUS ADVANTAGE AND ADDITIVES SDS BASE COATS & ADHESIVES - PAREX 121 DRY BASE COAT AND ADHESIVE SDS BASE COATS & ADHESIVES - PAREX 121 DRY HI BASE COAT AND ADHESIVE SDS BASE COATS & ADHESIVES - PAREX 121 DRY OPTIMUM BASE COAT AND ADHESIVE SDS BASE COATS & ADHESIVES - PAREX 121 DUSTLESS BASE COAT AND ADHESIVE SDS BASE COATS & ADHESIVES - PAREX 121 WET OPTIMUM BASE COAT AND ADHESIVE SDS BASE COATS & ADHESIVES - PAREX 302 ABC N1 BASE COAT & ADHESIVE SDS BASE COATS & ADHESIVES - PAREX 303 SHEATHING ADHESIVE SDS FINISHES - PAREX AQUASOL FINISHES SDS FINISHES - PAREX DPR SAND BEST FINISH SDS FINISHES - PAREX DPR STANDARD FINISH SDS FINISHES - PAREX IMAGE SMOOTH FINISH SDS FINISHES - PAREX OPTIMUM FINISH SDS MESHES - PAREX USA MESH SDS PRIMERS - PAREX USA PRIMER SDS
-
Technical Data Sheet
ACCESSORIES - PAREX USA ACCEL - DRY ACCESSORIES - PAREX USA ACCEL - PAK ACCESSORIES - PAREX USA PLUS ADVANTAGE AND SILICONE ADDITIVE BASE COATS & ADHESIVES - PAREX 121 DRY BASE COAT AND ADHESIVE BASE COATS & ADHESIVES - PAREX 121 DRY HI BASE COAT & ADHESIVE BASE COATS & ADHESIVES - PAREX 121 DUSTLESS BASE COAT AND ADHESIVE BASE COATS & ADHESIVES - PAREX 121 OPTIMUM DRY BASE COAT AND ADHESIVE BASE COATS & ADHESIVES - PAREX 121 OPTIMUM WET BASE COAT AND ADHESIVE BASE COATS & ADHESIVES - PAREX 121 WET BASE COAT AND ADHESIVE BASE COATS & ADHESIVES - PAREX 302 ABC N1 BASE COAT AND ADHESIVE BASE COATS & ADHESIVES - PAREX 303 SHEATHING ADHESIVE FINISHES - PAREX AQUASOL FINISHES FINISHES - PAREX DPR OPTIMUM FINISH FINISHES - PAREX DPR SAND BEST FINISH FINISHES - PAREX DPR STANDARD ACRYLIC FINISHES FINISHES - PAREX IMAGE SMOOTH FINISH MESHES - PAREX USA REINFORCING MESH PRIMERS - PAREX USA PRIMER
Disclaimer
Parex CI systems products must be assembled as a system. Only Parex products or Parex USA approved products can be used to build the specified system. Failure to do so will void the warranty. Warranties are available upon request and will be issued to Parex USA currently listed applicators (CLA).
Parex USA applicators (CLA) status must be obtained prior to the start of the job.
Parex CI systems specifications and recommendations must be followed. Information can be found on the Parex website. Parex CI systems products should only be installed by Parex USA currently listed applicators (CLA).
Speciality CI Systems Assemblies: CI systems are available in a variety of configurations that can be engineered to meet specific design requirements. Those provided above are the most commonly specified. Please contact our Architectural Sales or Technical Support Teams for more design options that can help you create an energy efficient, code compliant, CI systems assembly with unlimited aesthetic flexibility.
Parex CI systems products must be assembled as a system. Only Parex products or Parex USA approved products can be used to build the specified system. Failure to do so will void the warranty. Warranties are available upon request and will be issued to Parex USA currently listed applicators (CLA).
Parex USA applicators (CLA) status must be obtained prior to the start of the job.
Parex CI systems specifications and recommendations must be followed. Information can be found on the Parex website. Parex CI systems products should only be installed by Parex USA currently listed applicators (CLA).
Speciality CI Systems Assemblies: CI systems are available in a variety of configurations that can be engineered to meet specific design requirements. Those provided above are the most commonly specified. Please contact our Architectural Sales or Technical Support Teams for more design options that can help you create an energy efficient, code compliant, CI systems assembly with unlimited aesthetic flexibility.